HDPE Power & Communications Catalog - Catalog - Page 9
Conduit
Comm-Line™
Comm-Line is one of the most commonly used
conduit solutions for telecommunications and
fiber-optic projects across the U.S.
Standards:
ASTM F2160 & UL 651A
Sizes:
• IPS in diameters 3/4 - 16 inches
•
DIPS in diameters 4 - 26 inches
Colors:
• Available in 12 colors plus optional striping
•
Custom colors available upon request
Ribbing:
• Straight longitudinal internal ribbing is available
Installation Methods:
• Plow
for 2 inch diameter conduit and below
•
Uniform straight internal ribbing spans the length
of the pipe
Pull Tape:
• Pull tape offered in several tensile strengths
•
Direct Burial
•
HDD
•
Within existing conduit
Delivery Methods:
• Segmented Reels
Atkore - United Poly Systems standard pull tape
•
is 1130 lbs strength
•
•
Seperate lines can be wound on the
same reel
Other options include strengths from 200 to
2500 lbs
HDPE conduit material de昀椀nition according to ASTM F2160
Property
Range or Minimum Requirement
Units
Cell Class
Test Method
Density
0.941 - 0.955
g/cc
3
ASTM D 792 or 1505
Melt Index
< 0.25 - 0.40
g/10 minutes
3 or 4
ASTM D 1238
Flexural Modulus
110,000 - 160,000
psi
4 or 5
ASTM D 790
Tensile Strength
3000 - 4000
psi
4 or 5
ASTM D 638
F20 > 192
Hours (condition C)
3 or 4
ASTM D 1693
0, 1, 2, 3 or 4
ASTM D 2837
Environmental Stress Crack Resistance
HDB
Not Defined
These are nominal values and used as guidelines only. This is not a product specification and does not indicate minimum or maximum operating values.
atkore.com
9
